View LQ070Y3DG3A_7892148.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

wvga module featuring led backlight, 16:9 aspect ratio, excellent color rendition, 350 nits brightness, and 300:1 contrast. full specifications listing LQ070Y3DG3A lcd module product specification february 2009 lcd specification lcd group technical document

records of revision LQ070Y3DG3A ^spec no. date revised summary note no. page ld-21212a feb.17.2009 - - 1 st issue
ld21212a-1 these specification sheets are the propr ietary product of sharp corporat ion(?sharp) and include materials protected under copyright of sharp. do not reproduce or cause any third party to reproduce them in any form or by any means, electronic or mechanical, for any purpose, in whole or in part, without the express written permission of sharp. in case of using the device for applications such as control and safety equipment for transportation(aircraft, trains, automobiles, etc. ), rescue and security equipment and various safety related equipment which require higher reliability and safety, take into consideration that appropriate measur es such as fail-safe functions and redundant system design should be taken. do not use the device for equipment that requires an extr eme level of reliability, such as aerospace applications, telecommunication equipment(trunk lines), nuclear power control equipment and medical or other equipment for life support. sharp assumes no responsibility for any damage resulting from the use of the device, which does not comply with the instructions, and the precautions specified in these specification sheets. contact and consult with a sharp sales representative for any questions about this device.
ld21212a-2 table of contents 1. application ................................................................ ..............3 2. overview ................................................................ ................3 3. mechanical specifications ................................................................ ...3 4. input terminals ................................................................ ...........4 4-1. tft-lcd panel driving ................................................................ .4 4-2. led- backlight driving ................................................................ .4 5. absolute maximum ratings ................................................................ .5 6. electrical characteristics ................................................................ ....5 6-1.tft-lcd panel driving ................................................................ .5 6-2. backlight driving ................................................................ ......7 7. timing characteristics of input signals ........................................................7 7-1. timing characteristics ................................................................ ..7 7-2. display position ................................................................ .......8 7-3. input data signals and display position on the screen ...........................................8 fig 1. input signal timing chart ................................................................ .9 8. input signals, basic display colo rs and gray scale of each color ..................................10 9. optical characteristics ................................................................ .....11 10. display quality ................................................................ .........12 11. handling precautions ................................................................ .....13 12. packing form ................................................................ ...........14 13. reliability test items ................................................................ .....14 14. label ................................................................ .................15 15. storage conditions ................................................................ .......16 fig 2. packing form ................................................................ .........17 fig 3. outline demensions ................................................................ ....18
ld21212a-3 1. application this specification applies to a color tft-lcd module, LQ070Y3DG3A. 2. overview this module is a color active matrix lcd module incorporating amorphous silicon tft (thin film transistor). it is composed of a color tft-lcd panel, driver ics, power suppl y circuit, and a backlight unit. graphics and texts can be displayed on a 8003480 dots panel wi th 16,194,277 colors by supplyi ng 24bit digital signal interface (rgb ?~ 8bit)and supplying +3.3v dc supply voltages for tft-lcd panel driving and supply voltage for backlight. in this tft-lcd panel , low reflection / color filters of ex cellent color performance and backlights of high brightness are incorporated to realize brighter and clearer pictures, making this model optimum for use in multi-media applications. optimum viewing direction is 6 o'clock. backlight-driving dc/dc converter is not built in this module. 3. mechanical specifications parameter specifications unit display size 17.8 (7.0") diagonal cm active area 152.4(h)91.4 (v) mm 800 (h)480 (v) pixel pixel format (1 pixel = r+g+b dots) aspect ratio 15 : 9 pixel pitch 0.1905 (h)0.1905 (v) mm pixel configuration r,g,b horizontal stripe display mode normally white surface treatment anti-glare and hard-coating 2h parameter min. typ. max. unit remark width 162.9 163.2 163.5 mm height 103.7 104.0 104.3 mm unit outline dimensions [note 1] ?| 3.9 4.2 mm [note 1] depth ?| ?| 6.3 mm [note 2] mass ?| 135 150 g [note 1] excluding the fpc/ffc and parts mounting area. outline dimensions is shown in fig.3 [note 2] including the fpc/ffc and parts mounting area.
ld21212a-4 4. input terminals 4-1. tft-lcd panel driving cn1(timing signals,data signals and +3.3v dc power supply) pin no. symbol function pin no. symbol function 1 gnd 21 b0 blue data signal(lsb) 2 gnd 22 b1 blue data signal 3 vcc +3.3v power supply 23 b2 blue data signal 4 vcc +3.3v power supply 24 b3 blue data signal 5 r0 red data signal(lsb) 25 b4 blue data signal 6 r1 red data signal 26 b5 blue data signal 7 r2 red data signal 27 b6 blue data signal 8 r3 red data signal 28 b7 blue data signal(msb) 9 r4 red data signal 29 gnd 10 r5 red data signal 30 dotclk dot-clock signal 11 r6 red data signal 31 nc 12 r7 red data signal(msb) 32 hsync line synchronization signal 13 g0 green data signal(lsb) 33 vsync frame synchronization signal 14 g1 green data signal 34 den display enable signal 15 g2 green data signal 35 nc 16 g3 green data signal 36 nc 17 g4 green data signal 37 gnd 18 g5 green data signal 38 gnd 19 g6 green data signal 39 nc 20 g7 green data signal(msb) 40 nc [note 1] please use nc by open or gnd. nc termin al is not connected with the internal circuit. using ffc : sml2cd-40x77.5-adx7(bl)-p0.5-s4.0+4.0-m-n(35)-aup-hf ul21147(sumitomo electric industries, ltd) recommendation connector : fh28-40s-0.5sh(0.5) (hirose):bottom contact fh12a-40s-0.5sh(55) (hirose):top contact (sharp is not responsible to its product quality, if the user applies a connector not corresponding to the above model.) 4-2. led- backlight driving pin no. symbol function 1 led-a1 power supply for led (anode) 2 led-c1 power supply for led (cathode) 3 led-a2 power supply for led (anode) 4 led-c2 power supply for led (cathode) 5 led-a3 power supply for led (anode) 6 led-c3 power supply for led (cathode) [note 1]led-fpc outline dimensions is shown in fig.3 reccommendation connector: 04-6298-006-000-883+ (kyosera) : bottom contact 04-6277-006-000 or 001-883+ (kyosera) : double-sided contact
ld21212a-5 5. absolute maximum ratings ratings parameter symbol condition min. max. unit remark input voltage v i ta=25 ?? -0.3 vcc+0.3 v [note 1] +3.3v supply voltage vcc ta=25 ?? 0 +4.0 v led forward current i led ta=25 ?? 0 30 ma led reverse voltage v led_r ta=25 ?? ?| 5 v [note 2] storage temperature tstg ?| -30 +70 ?? operating temperature topa ?| -20 +50 ?? [note 3] [note 1] r0-7 ?a g0-7 ?a b0-7 ?a dotclk ?a hsync ?a vsync ?a den [note 2] led_a to led_cn (n=1,2,3) absolute maximum ratings for each pair. [note 3] humidity ?f 95%rh max. at ta ?? +40 ?? . maximum wet-bulb temperature at +39 ?? or less at ta>+40 ?? . no condensation. 6. electrical characteristics 6-1.tft-lcd panel driving ta ??+ 25 ?? parameter symbol min. typ. max. unit remark supply voltage vcc +3.0 +3.3 +3.6 v [note 1] current dissipation icc ?| 140 185 ma [note 2] permissive input ripple voltage v rp ?| ?| 100 mv p-p vcc = +3.3v high v th ?| ?| 0.3 ?~ v cc mv input voltage range low v tl 0.7 ?~ v cc ?| ?| mv [note 3, 4] high i oh ?| ?| ?} 10 ? a v i = vcc [note 3, 4] input leak current low i ol ?| ?| ?} 10 ? a v i = 0v [note 3, 4] [note 1]on-off conditions for supply voltage t1 t2 vcc valid backligh t signal 0.1vcc 0.1vcc 0.1vcc t3 t5 backlight on t4 (lvds interface) t6 off t7 0.9vcc 0.9vcc
ld21212a-6 symbol min. max. unit remark t1 0 10 ms t2 0 1 ms t3 0 1 ms t4 0 400 ms t5 1 ?| s t6 180 ?| ms *1 t7 5 ?| ms *1 *1 : as for the power sequence for backlight, it is recommended to apply above mentioned input timing. if the backlight is lit on and off at a timing other than shown above, displaying image may get disturbed. [note] do not keep the interface signal high-imp edance or unusual signal when power is on. vcc-dip conditions 1) 2.5 v ?? vcc ?? 3.0 v td ?? 10 ms under above condition, the display image should return to an appropriate figure after vcc voltage recovers. 2) vcc ?? 2.5 v vcc-dip conditions should also follow the on-off conditions fo r supply voltage [note 2] typical current situation : v cc = +3.3v, f vsync = 60hz measuring pattern:gs-0-gs60 vertical gray scale. gs(4n) n:natural number(0 ?` 15) [note 3] r0-7 ?a g0-7 ?a b0-7 ?a dotclk ?a hsync ?a vsync ?a den [note 4] interface block diagram of the lcd vcc td ?r ?d ?o ?u ?q ?d ?t ?u rgb gs0 rgb gs16 rgb gs24 rgb gs224 rgb gs240 .... 8 8 8 8 8 8 56 ?? 56 ?? 56 ?? 56 ?? 56 ?? 56 ?? 56 ?? r0 ?` r7 hs enab ck g0 ?` g7 b0 ?` b7 vs internal cuircuit control ic r0 ?` r7 g0 ?` g7 b0 ?` b7 vs hs enab ck ?u?b?b interface ffc
ld21212a-7 6-2. backlight driving the backlight system is edge-lighting type with 24 white-led(white light emitting diode). the characteristics of white-led are shown in the fo llowing table. (ta=25 o c) parameter symbol min. typ. max. unit remark led voltage v l ?| 25.6 28 v i l =20ma led current range i l ?| 20 25 ma number of circuit strings ?| 3 ?| [note 1] led power consumption w l ?| 1.54 ?| w [note 2] led life time l l 10000 ?| ?| hour [note 3] [note 1] the led backlight is composed by 3 strings from which 8 led is connected with the series. the figure below shows the circuit chart. in each string, there is a ceramic capacitor for the electrostatic protection. [note 2] calculated value for reference ( i l v l ) [note 3] led life time is defined as the time when brightness become s 50 % of the original value. under the condition of ta = 25 ?? and i l = 20 ma,and continuous lighting. 7. timing characteristics of input signals 7-1. timing characteristics characteristics symbol min. typ. max. unit remark dotclk frequency 1/tc 31.95 33.26 34.6 mhz high width tch 10 ?| ?| ns lo width tc1 10 ?| ?| ns duty th/t 40 50 60 % data setup time tds 5 ?| ?| ns hold time tdh 5 ?| ?| ns hsync 31.45 31.75 ?| s period th 1024 1056 1088 clock pulse width thp 5 128 186 clock vsync period tv 520 525 530 line pulse width tvp 2 ?| tv-515 line horizonral display area thd 800 800 800 line phase difference of hsync - dotclk thc 8 ?| tc-10 ns phase difference of hsync - vsync tvh 1 ?| th-thp-10 clock vertical back porch tvs 35 35 35 line vertical front porch tvf 5 ?| ?| line vertical display area tvd 480 480 480 line [note1] in case of lower frequency, the deterioration of display quality, flicker etc., may be occurred. ceramic capacitor led-a1 led-a2 led-c2 led-a3 led-c3 led-c1
ld21212a-8 1 ?e 1 1 ?e 2 1?e 3 2 ?e 1 2 ?e 2 3 ?e 1 480 1 1 800 b 480 800 display position of input data(v ?e h) g r 7-2. display position characteristics symbol min. typ. max. unit remark den setup time tes 5 ?| tc-10 ns pulse width tep ?| 800 ?| clock phase difference of hsync - den the 88 ?| 215 clock [note] (horizontal display direction) when ?den? signal is fixed low, 216 clocks are counted from hsync negative edge and data from after are available. if you need other timing, please use ?den? signal. (vertical display direction) 36 lines are counted from vsync negative edge and data from next line are available. (?den? signal) when ?den? signal is active, ?g den? signal input continuously or fixed ?l? in vertical invalid data period. caution image will not be displayed on the right position otherwise. 7-3. input data signals and display position on the screen
ld21212a-9 fig 1. input signal timing chart * only when ?den? terminal is fix ed "l ow" tc h tcl tc thp t h dh1 dh2 dh3 dh479 dh480 vertical invalid data period tv h tvp tv tv s tvd n umber of v -data line 12 35 horizontal sync. si gnal (hsync) clock signa l (dotclk) data signal (r0~r5,g0~g5 , b0~b5) data enable signa l (den) vertical sync. signal (vsync) horizontal sync. si gnal (hsync) data signal (r0~r5,g0~g5 , b0~b5) vertical invalid data perio d 0 . 3 v c c 0 . 3 v c c 0 . 3 v c c 0 . 7 v c c 0 . 7 v c c 0 . 3 v c c n um ber of lin e 0 . 7 v c c 0 . 7 v c c thc c1* c215* c216* td s tdh tv f data enable signal (den ) ?den? signal input continuously or fixed ?l? in vertical invalid data period d1 d2 d3 d799 d80 0 horizontal invalid data period n um ber of cloc k n umber of h-dat a the tes th d te p horizontal invalid da ta period 0 . 7 v c c 0 . 3 v c c 0 . 7 v c c 0 . 3 v c c 0 . 3 v c c 0 . 7 v c c
ld21212a-10 8. input signals, basic display colo rs and gray scale of each color data signal colors & gray gra y scale scale r0 r1 r2 r3 r4 r5 r6 r7 g0 g1 g2 g3 g4 g5 g6 g7 b0 b1 b2 b3 b4 b5 b6 b7 black ?| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 blue ?| 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 green ?| 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 c y an ?| 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 x x 1 1 1 1 1 1 red ?| x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ma g enta ?| x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 yellow ?| x x 1 1 1 1 1 1 x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 white ?| x x 1 1 1 1 1 1 x x 1 1 1 1 1 1 x x 1 1 1 1 1 1 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darke r gs2 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs250 0 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? gs251 1 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 bri g hte r gs252 x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 ? red gs255 x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 darke r gs2 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs250 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 ? gs251 0 0 0 0 0 0 0 0 1 1 0 1 1 1 1 1 0 0 0 0 0 0 0 0 bri g hte r gs252 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 ? green gs255 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 0 0 0 0 0 0 0 0 black gs0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 gs1 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 0 darke r gs2 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 0 0 0 0 0 gs250 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 0 1 1 1 1 1 ? gs251 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 1 1 0 1 1 1 1 1 bri g hte r gs252 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 ? blue gs255 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 0 x x 1 1 1 1 1 1 0 : low level voltage, 1 : high level voltage. ?w :don ? t care(gs252?`gs255 are same grayscale) each basic color can be displayed in 253 gray scales from 8 bit data signals. according to the combination of total 24 bit data signals, the 16-million-color display can be achieved on the screen. b a s i c c o l o r gray scale of red gray scale of green gray scale of blue
ld21212a-11 9. optical characteristics ta=+25 ?? , vcc=+3.3v parameter symbol condition min. typ. max. unit remark horizontal ?? 21, ?? 22 ?| 65 ?| deg. ?? 11 ?| 50 ?| deg. viewing angle range vertical ?? 12 cr>10 ?| 60 ?| deg. [note 1,3,6] contrast ratio crn ??=0?? 300 ?| ?| [note 2,4,6] response time ?? r+ ?? d ?| 35 40 ms [note 2,5,6] x 0.252 0.302 0.352 chromaticity of white y 0.279 0.329 0.379 x 0.533 0.583 0.633 chromaticity of red y 0.272 0.322 0.372 x 0.274 0.324 0.374 chromaticity of green y 0.498 0.548 0.598 x 0.103 0.153 0.203 chromaticity of blue y ?? =0 ?? 0.048 0.098 0.148 [note 2,6] luminance of white y li 280 350 ?| cd/m 2 i f =20ma [note 2,6] ?| the measurement shall be executed 30 minutes after lighting at rating. condition : (i f =20ma) the optical characteristics shall be measured in a dark room or equivalent. [note 1] measuring viewing angle range [note 2] other measurements lcd panel ez contrast 160rh (eldim) center of the screen ( ?? =0?? ) lcd panel center of the screen ( ??=0?? ) 400mm field=?q?? bm-5a (topcon)
ld21212a-12 [note 3] definitions of viewing angle range: [note 4] definition of contrast ratio: the contrast ratio is defined as the following. contrast ratio (cr) ?? [note 5] definition of response time: the response time is defined as the following figure and shall be measured by switching the input signal for "black" and "white" . [note 6] this shall be measur ed at center of the screen. 10. display quality the display quality of the color tft-lcd module shall be in compliance with the incoming inspection standard. luminance (brightness) with all pixels white luminance (brightness) with all pixels black
ld21212a-13 11. handling precautions a) be sure to turn off the power supply when inserting or disconnecting the cable. please insert for too much stress not to jo in ffc/fpc in the case of insertion of ffc/fpc. b) be sure to design the cabinet so that the module can be installed without any extra stress such as warp or twist. c) since the front polarizer is easily damaged, pay attention not to scratch it. d) wipe off water drop immediately. long contact with water may cause discoloration or spots. e) when the panel surface is soiled, wipe it with absorbent cotton or other soft cloth. f) since the panel is made of glass, it may break or crac k if dropped or bumped on hard surface. handle with care. g) since cmos lsi is used in this module, take care of static electricity and injure the human earth when handling. observe all other precautionary requirements in handling components. h) this module has its circuitry pcbs on the rear side and should be handled carefully in order not to be stressed. i) protect sheet(laminate film) is attached to the module surface to prevent it from being scratched. peel the sheet off slowly just before the use with strict attention to electrostatic charges. ionized air shall be blown over during the action. blow off the 'dust' on the polarizer by using an ionized nitrogen gun, etc. working under the following environments is desirable. ?e all workers wear conductive shoes, conductive clothes, conductive fingerstalls and grounding belts without fail. ?e use ionized blower for electrostatic removal, and peel of the protect sheet with a c onstant speed. (peeling of it at over 2 seconds) j) the polarizer surface on the panel is treated with anti -glare for low reflection. in case of attach ing protective board over the lcd, be careful about the optical in terface fringe etc. which degrades display quality. k) do not expose the lcd module to a direct sunlight, for a long period of time to protect the module from the ultra violet ray. l) when handling lcd modules and assembling them into cabinets, please be noted that long-term storage in the environment of oxidization or deoxidization gas and the use of such materials as reagent, solvent, adhesive, resin, etc. which generate these gasses, may cause corrosion and discoloration of the lcd modules. m) liquid crystal contained in the panel may leak if the lc d is broken. rinse it as soon as possible if it gets inside your eye or mouth by mistake. n) disassembling the module can cause permanent damage and should be strictly avoided. please don't remove the fixed tape, insulating tape etc that was pasted on the original module. (except for protection film of the panel.) o) be careful when using it for long time with fixed pattern display as it may cause afterimage. (please use a screen saver etc., in order to avoid an afterimage.) p) adjusting volume have been set optimally before shipment, so do not change any adjusted value. if adjusted value is changed, the specification may not be satisfied. q) if a minute particle enters in the module and adheres to an optical material, it may cause display non-uniformity
ld21212a-14 issue, etc. therefore, fine-pitch filters have to be installed to cooling and inhalation hole if you intend to install a fan. r) epoxy resin (amine series curing agent), silicone adhesive material (dealcoholization series and oxime series), tray forming agent (azo compound) etc, in the cabinet or the packing materials may induce abnormal display with polarizer film deterioration regardless of contact or noncontact to polarizer film. be sure to confirm the component of them. s) do not use polychloroprene. if you use it, there is some possibility of generating cl 2 gas that influences the reliability of the connection between lcd panel and driver ic. t) do not put a laminate film on lcd module, after peeli ng of the original one. if you put on it, because of the occurrence of air gaps between the polarizer and the film, it may cause discoloration or spots. 12. packing form piling number of cartons max.8 package quantity in one carton 40pcs carton size 380 (w) ?~ 575(d) ?~ 225(h) mm total mass of one carton filled with full modules 10 kg packing form fig.2 13. reliability test items no. test item conditions 1 high temperature operation test ta = +50 ?? 240h 2 low temperature operation test ta = -20 ?? 240h 3 high temperature storage test ta = +70 ?? 240h 4 low temperature storage test ta = -30 ?? 240h 5 high temperature & high humidity operation test ta = +40 ?? ; 95 %rh 240h (no condensation) 6 vibration test (non- operating) frequency range: 10 to 55hz sweep: 1.5mm sweep time: 1minute test period: 2 hours for each direction of x,y,z 7 shock test direction: x, y, z, time: 3 times for each direction. impact value: 980m/s2, action time 6ms [result evaluation criteria] under the display quality test conditions with normal operation state, these shall be no change which may affect practical display function. (normal operation state ?f temperature:15 ?` 35 ?? , humidity:45 ?` 75 ?? , atmospheric pressure:86 ?` 106kpa)
ld21212a-15 14. label 1) module label: notation: ?@ model no. ?a serial no. ?k?p?o?v?o?x?r?c?f?r?` ?x?q?o?o?o?o?o?p _ ?@ ?a details of serial no (example) ?x ?q ?o ?o ?o ?o ?o ?p [note] production year ?f 9(2009) ?a 0(2010) ?a 1(2011) ?a?e?e?e?e production month ?f 1(jan) ?a 2(feb) ?a?e?e?e?a 9(sep) ?a x(oct) ?a y(nov) ?a z(dec) 2) packing bar code label notation/ bar code: ?@ model no. ?a date ?b quantity ?| r.c. ?i rohs compliance ?j means these parts have corresponded with the rohs directive. ?e??i???f ?i?s?r?j?k?p?o?v?o?x?r?c?f?r?` ?k???? ?m o ?d ?f ?i?p?s?j?q?o?o?x?d?o?q?d?o?p ?p???????????????f?i?p?j ?s?o ?????? ???[?u?i?? ?f bar code ?i?@?j bar code ( ?a ?j bar code ?i ?b ?j ?v???[?v????p???x??????b ?@ ?a ?b revision code(none, a,b,?e?e?e) serial no(000001?`) production year(9?`) production month(1?`9,x,y,z) ?q?d?b?d
ld21212a-16 15. storage conditions temperature 0 to 40 degrees celsius relative humidity 70% and below direct sun light please keep the product in a dark room or cover the product to protect from direct sun light. atmospheric condition please refrain from keeping the product with possible corrosive gas or volatile flux. prevention of dew * please store the product carton either on a wood en pallet or a stand / rak to prevent dew. do not place directly on the floor. in addition, to obtain moderate ventilation in between the pallet?s top and bottom surfaces, pile the cartons up in a single direction and in order. * please place the product cartons away from the strage wall. * please maintain the storage area with an appropriate ventilation. it is recommendable to furnish the storage area with equi pments such as ve ntilation systems. * please maintain the ambient temperature within the range of natural environmental fluctuation.
ld21212a-17 fig 2. packing form
ld21212a-18 fig 3. outline dimensions
ld-20706a north a merica sharp microelectronics of the americas 5700 nw pacific rim blvd. camas, wa 98607, u.s.a. phone: (1) 360-834-2500 fax: (1) 360-834-8903 www.sharpsma.com taiwan sharp electronic components (taiwan) corporation 8f-a, no. 16, sec. 4, nanking e. rd. taipei, taiwan, republic of china phone: (886) 2-2 577-7341 fax: (886) 2-2 577-7 326/2-2 577-7328 china sharp microelectronics of china (shanghai) co., ltd. 28 xin jin qiao road king tower 16f pudong shanghai, 201206 p.r. china phone: (86) 21-5854-7710/21-5834-6056 fax: (86) 21-5854-4340/21-5834-6057 head office: no. 360, bashen road, xin development bldg. 22 waigaoqiao free trade zone shanghai 200131 p.r. china email: smc@china.global.sharp.co.jp europe sharp microelectronics europe division of sharp electronics (europe) gmbh sonninstrasse 3 20097 hamburg, germany phone: (49) 40-2376-2286 fax: (49) 40-2376-2232 www.sharpsme.com singapore sharp electronics (singapore) pte., ltd. 438a, alexandra road, #05-01/02 alexandra technopark, singapore 119967 phone: (65) 271-3566 fax: (65) 271-3855 korea sharp electronic components (korea) corporation rm 501 geosung b/d, 541 dohwa-dong, mapo-ku seoul 121-701, korea phone: (82) 2-711-5813 ~ 8 fax: (82) 2-711-5819 japan sharp corporation electronic components & devices 22-22 nagaike-cho, abeno-ku osaka 545-8522, japan phone: (81) 6-6621-1221 fax: (81) 6117-725300/6117-725301 www.sharp-world.com hong kong sharp-roxy (hong kong) ltd. 3rd business division, 17/f, admiralty centre, tower 1 18 harcourt road, hong kong phone: (852) 28229311 fax: (852) 2 8660779 www.sharp.com.hk shenzhen representative office: room 13b1, tower c, electronics science & technology building shen nan zhong road shenzhen, p.r. china phone: (86) 755-3273731 fax: (86) 755-3273735 specifications are subject to change without notice. suggested applications (if any) are for standard use; see important restrictions for limitations on special applications. see limited warranty for sharp?s product warranty. the limited warranty is in lieu, and exclusive of, all other warranties, express or implied. all express and implied warr anties, including the warranties of merchantability, fitness for use and fitness for a particular purpose, are specifically excluded. in no event will sharp be liable, or responsible in any way, for any incidental or consequential economic or property damage. lcd group lcd specification technical document

▲Up To Search▲

Price & Availability of LQ070Y3DG3A

	To Download LQ070Y3DG3A Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .